文章詳情
美國MARK新款Series 系列測力計參數對比
日期：2025-07-03 18:08
瀏覽次數：2289
摘要：
美國MARK新款Series 系列測力計參數對比 美國MARK新款Series 系列測力計參數對比
美國MARK新款Series 系列測力計參數對比
| Series 5 | Series 4 | Series 3 | |
| Accuracy (FS ±1 digit): | ±0.1% | ±0.2% | ±0.3% |
| Sampling rate: | 7,000 Hz | 3,000 Hz | 2,000 Hz |
| Resolution: | 1/5,000 | 1/2,000 | 1/1,000 |
| Data outputs: | USB, RS-232, Mitutoyo, Analog | USB, RS-232, Mitutoyo, Analog | USB |
| Programmable auto output via USB/RS-232: | Yes | No | No |
| MESURTM Lite software included: | Yes | Yes | Yes |
| Data output functionality: | By pressing DATA button, or requesting from a PC or other device | By pressing DATA button, or requesting from a PC or other device (currently displayed reading only) | By pressing DATA button, send current reading only. Cannot request externally. |
| ASCII command set for external control (Gauge Control Language 2): | Full command set | "?" only (request current reading) | None |
| Communication with MESURTMgauge and MESURTM Lite: | Full communication | Send data from gauge or request from software (single readings or continuous readings) | Send current (single) readings only, cannot request from software |
| Communication with ESM301 test stand and Series DC controllers: | Full communication, including PC control | Stop/reverse at force set points, overload protection, and communication through the “?” character only | None |
| Data memory: | 1,000 readings with output, with individual data point deletion, or clear all | 50 readings with output, with individual data point deletion, or clear all. | No |
| Statistics calculations and output to PC: | Yes | Yes | N/A |
| Averaging mode: | Yes | No | No |
| External trigger mode: | Yes | No | No |
| Analog load bar graph shown on display: | Yes | Yes | Yes |
| On-screen set point (pass/fail) indicators: | Yes, with markers on analog load bar graph | Yes, with markers on analog load bar graph | Yes, with markers on analog load bar graph |
| Display: | Graphic, backlit LCD, with backlight auto-off | Graphic, backlit LCD, with backlight auto-off | Graphic, backlit LCD, with backlight auto-off |
| Password protection: | Yes, for calibration and individual keys | No | No |
| Peak readings always displayed: | Yes | Yes | Yes |
| Set points: | High / low indicators, with output (dedicated pins for high and low) | High / low indicators, with output (dedicated pins for high and low) | High / low indicators, no output |
| Programmable audible tones (beeps): | Yes | Yes | Yes |
| Certificate of calibration: | NIST-traceable with data (10 points in each direction) | NIST-traceable with data (10 points in each direction) | NIST-traceable without data (data is available for an additional charge) |
| Configurable calibration (weight increments and no. of data points): | Yes | Yes | Yes |
| Overload outputs: | Dedicated pins for tension and compression | Dedicated pins for tension and compression | No |
| No. of units of measurement: | 5 | 5 | 3 |
| Capacity range / no. of capacities: | 0.12 lbF – 1000 lbF [0.5 N - 5000 N] / 12 | 0.12 lbF – 500 lbF [0.5 N - 2500 N] / 11 | 0.12 lbF – 500 lbF [0.5 N - 2500 N] / 11 |
| Reversible housing: | Yes | Yes | Yes |
| Dimensions: | 2.5 x 5.9 x 1.3 in. [64 x 150 x 33 mm] | 2.5 x 5.9 x 1.3 in. [64 x 150 x 33 mm] | 2.5 x 3.9 x 1.5 in. [64 x 99 x 38 mm] |
| Series 5 | Series 4 | Series 3 | |
| Accuracy (FS ±1 digit): | ±0.1% | ±0.2% | ±0.3% |
| Sampling rate: | 7,000 Hz | 3,000 Hz | 2,000 Hz |
| Resolution: | 1/5,000 | 1/2,000 | 1/1,000 |
| Data outputs: | USB, RS-232, Mitutoyo, Analog | USB, RS-232, Mitutoyo, Analog | USB |
| Programmable auto output via USB/RS-232: | Yes | No | No |
| MESURTM Lite software included: | Yes | Yes | Yes |
| Data output functionality: | By pressing DATA button, or requesting from a PC or other device | By pressing DATA button, or requesting from a PC or other device (currently displayed reading only) | By pressing DATA button, send current reading only. Cannot request externally. |
| ASCII command set for external control (Gauge Control Language 2): | Full command set | "?" only (request current reading) | None |
| Communication with MESURTMgauge and MESURTM Lite: | Full communication | Send data from gauge or request from software (single readings or continuous readings) | Send current (single) readings only, cannot request from software |
| Communication with ESM301 test stand and Series DC controllers: | Full communication, including PC control | Stop/reverse at force set points, overload protection, and communication through the “?” character only | None |
| Data memory: | 1,000 readings with output, with individual data point deletion, or clear all | 50 readings with output, with individual data point deletion, or clear all. | No |
| Statistics calculations and output to PC: | Yes | Yes | N/A |
| Averaging mode: | Yes | No | No |
| External trigger mode: | Yes | No | No |
| Analog load bar graph shown on display: | Yes | Yes | Yes |
| On-screen set point (pass/fail) indicators: | Yes, with markers on analog load bar graph | Yes, with markers on analog load bar graph | Yes, with markers on analog load bar graph |
| Display: | Graphic, backlit LCD, with backlight auto-off | Graphic, backlit LCD, with backlight auto-off | Graphic, backlit LCD, with backlight auto-off |
| Password protection: | Yes, for calibration and individual keys | No | No |
| Peak readings always displayed: | Yes | Yes | Yes |
| Set points: | High / low indicators, with output (dedicated pins for high and low) | High / low indicators, with output (dedicated pins for high and low) | High / low indicators, no output |
| Programmable audible tones (beeps): | Yes | Yes | Yes |
| Certificate of calibration: | NIST-traceable with data (10 points in each direction) | NIST-traceable with data (10 points in each direction) | NIST-traceable without data (data is available for an additional charge) |
| Configurable calibration (weight increments and no. of data points): | Yes | Yes | Yes |
| Overload outputs: | Dedicated pins for tension and compression | Dedicated pins for tension and compression | No |
| No. of units of measurement: | 5 | 5 | 3 |
| Capacity range / no. of capacities: | 0.12 lbF – 1000 lbF [0.5 N - 5000 N] / 12 | 0.12 lbF – 500 lbF [0.5 N - 2500 N] / 11 | 0.12 lbF – 500 lbF [0.5 N - 2500 N] / 11 |
| Reversible housing: | Yes | Yes | Yes |
| Dimensions: | 2.5 x 5.9 x 1.3 in. [64 x 150 x 33 mm] | 2.5 x 5.9 x 1.3 in. [64 x 150 x 33 mm] | 2.5 x 3.9 x 1.5 in. [64 x 99 x 38 mm] |
| Accuracy (FS ±1 digit): | ±0.1% | ±0.2% | ±0.3% |
| Sampling rate: | 7,000 Hz | 3,000 Hz | 2,000 Hz |
| Resolution: | 1/5,000 | 1/2,000 | 1/1,000 |
| Data outputs: | USB, RS-232, Mitutoyo, Analog | USB, RS-232, Mitutoyo, Analog | USB |
| Programmable auto output via USB/RS-232: | Yes | No | No |
| MESURTM Lite software included: | Yes | Yes | Yes |
| Data output functionality: | By pressing DATA button, or requesting from a PC or other device | By pressing DATA button, or requesting from a PC or other device (currently displayed reading only) | By pressing DATA button, send current reading only. Cannot request externally. |
| ASCII command set for external control (Gauge Control Language 2): | Full command set | "?" only (request current reading) | None |
| Communication with MESURTMgauge and MESURTM Lite: | Full communication | Send data from gauge or request from software (single readings or continuous readings) | Send current (single) readings only, cannot request from software |
| Communication with ESM301 test stand and Series DC controllers: | Full communication, including PC control | Stop/reverse at force set points, overload protection, and communication through the “?” character only | None |
| Data memory: | 1,000 readings with output, with individual data point deletion, or clear all | 50 readings with output, with individual data point deletion, or clear all. | No |
| Statistics calculations and output to PC: | Yes | Yes | N/A |
| Averaging mode: | Yes | No | No |
| External trigger mode: | Yes | No | No |
| Analog load bar graph shown on display: | Yes | Yes | Yes |
| On-screen set point (pass/fail) indicators: | Yes, with markers on analog load bar graph | Yes, with markers on analog load bar graph | Yes, with markers on analog load bar graph |
| Display: | Graphic, backlit LCD, with backlight auto-off | Graphic, backlit LCD, with backlight auto-off | Graphic, backlit LCD, with backlight auto-off |
| Password protection: | Yes, for calibration and individual keys | No | No |
| Peak readings always displayed: | Yes | Yes | Yes |
| Set points: | High / low indicators, with output (dedicated pins for high and low) | High / low indicators, with output (dedicated pins for high and low) | High / low indicators, no output |
| Programmable audible tones (beeps): | Yes | Yes | Yes |
| Certificate of calibration: | NIST-traceable with data (10 points in each direction) | NIST-traceable with data (10 points in each direction) | NIST-traceable without data (data is available for an additional charge) |
| Configurable calibration (weight increments and no. of data points): | Yes | Yes | Yes |
| Overload outputs: | Dedicated pins for tension and compression | Dedicated pins for tension and compression | No |
| No. of units of measurement: | 5 | 5 | 3 |
| Capacity range / no. of capacities: | 0.12 lbF – 1000 lbF [0.5 N - 5000 N] / 12 | 0.12 lbF – 500 lbF [0.5 N - 2500 N] / 11 | 0.12 lbF – 500 lbF [0.5 N - 2500 N] / 11 |
| Reversible housing: | Yes | Yes | Yes |
| Dimensions: | 2.5 x 5.9 x 1.3 in. [64 x 150 x 33 mm] | 2.5 x 5.9 x 1.3 in. [64 x 150 x 33 mm] | 2.5 x 3.9 x 1.5 in. [64 x 99 x 38 mm] |